Skip to main content
Skip table of contents

Solution Prerequisites

The following are the prerequisites for setting up Voice recording solution under different deployment profiles. 


Voice Recording Solution

Hardware Sizing

For up to 100 concurrent agents

4 vCPU, 8 GB RAM, 500 GB HDD



Software Requirements

System Access Requirements

  • Administrative privileges (root) on the host machine are required to proceed with installation.

Port Utilisation

The local security policy and firewall should allow open communication on the following ports.

Type

Source Host

Port

Destination

Notes

Http/Https

voice-recording-solution

8080/8443

any





(lightbulb) Time Synchronisation

Communication between Voice Recording solution, Cisco CUCM, Cisco IP Phones (BIB enabled) carry timestamps. If the system dates and time are not synchronised the system can produce unpredictable results. Therefore, please make every effort to adhere to the following time synchronisation guidelines:

Voice Recording solution, Cisco CUCM, Cisco IP Phones (BIB enabled) should have their Time Zone and time configured properly according to the geographic region and synchronised. To configure the time zone, please see the instructions from the hardware or software manufacturer of NTP server. Voice Recording solution and Cisco CUCM should be synchronised to the second. This synchronisation should be maintained continuously and validated on a regular basis. For security reasons, Network Time Protocol (NTP) V 4.1+ is recommended.


JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.