Following are the business feature we support in our CUCM Connector.
|
Register |
Check if the required SIP Phone is registered, then the user will successfully log in via JTAPI User |
|---|---|
|
Accept Call |
User Can accept the Incoming Call |
|
Dial Outbound Call |
Users can dial the Outbound Call via Dialpad |
|
Blind Transfer |
A user can blind transfer the call to the other agent extension |
|
Conference Call |
A User can add another Agent/user to the Conference Room |
|
Transfer Consult Call |
|
|
Release Call |
A User can release the ongoing call. |
Register
-
User can provide the extension on which he/she wants to register. The extension should be up and running else he won't be able to register himSelf in this connector.
-
As soon as the user successfully registers inside the CUCM Connector, he will be able to see the following screen and he can perform all the call operations via this interface
Accept Call
As soon as the call rings on the user extension, he can see the incoming call notification on the toolbar along with the calling number. Users can also see the accept call button to answer this call.
As soon as the call is answered, the buttons for call control will get active and the user can see the following screen
-
Hold / Unhold call
-
Consult Call
-
Conference Call
-
Transfer Call
-
End Call
Hold / Resume Call
On the active call, the user can make the call hold/resume at any point in time by clicking on the hold/resume button
Consult Call
If the user is on an active call and wanted to consult with other agent extensions, he can simply do that by providing the extension and by clicking the consult button
Conference Call
After the consult call, if the user wants to add the consulted participant to the customer, he can simply do that by clicking on the conference button
Once the call is conferenced the agent can see all the participants available in the active call.
Direct Transfer Call
The user can directly transfer the call to another extension by providing the extension and clicking on the Transfer button
Call End
At any point of user can end the call by clicking the Call end button
Outbound Call
Users can initiate the outbound by providing the caller number
CUCM Cluster Support
Our JTAPI Connector does support the CUCM Cluster. We can connect with 3 nodes and if one node goes down we automatically connect with the other nodes and for the user, the system remains intact.