Live Call Transcription — User Guide

Overview

Live Call Transcription shows live call speech as text in the Agent Desk conversation while you are on a CX Voice call.

When you and the customer are connected, the Media Server listens to both sides of the call, turns speech into text, and posts those lines into the same conversation you already use for the call. You do not open a separate transcription screen.

Who this guide is for: Agents and supervisors who use Agent Desk during voice calls.

What you will see

  • Customer speech appears as normal conversation messages from the connector (customer) side.

  • Your own speech appears as agent messages in the same conversation thread.

  • Text is added as the call goes on — usually shortly after someone finishes speaking a phrase.

  • There is no extra button to “start transcription.” If the feature is enabled for your tenant and call type, text starts automatically when the call is bridged.

How to use it during a call

  1. Log in to Agent Desk as usual and go ready for voice.

  2. Accept or place the call so you and the customer are connected (bridged).

  3. Open the active conversation for that call (same place you see chat and other channel messages).

  4. Watch the conversation thread. Transcript lines appear there while you talk.

  5. Use the text as a live aid — for example to catch a number, name, or detail you may have missed.

You do not need to change any Agent Desk setting to turn this on. Enablement is handled by voice / Media Server configuration for your environment.

When transcription starts and stops

Situation

What happens

Call ringing / early media

No transcript yet

You and the customer are connected (bridged)

Transcript lines start appearing

Call ends

New transcript lines stop for that call

Call never connects to an agent

No live transcript on Agent Desk

Supported call types

When the feature is turned on for your tenant, it can cover:

  • Inbound voice calls (after bridge)

  • Manual outbound voice calls (after bridge)

  • Campaign outbound voice calls (after bridge), when that call type is enabled

What this does not cover

  • Consult, transfer, conference, or barge legs — not supported for Live Call Transcription

  • Voicemail

  • Calls that never bridge to an agent

  • A separate “transcript only” workspace — text always lands in the normal conversation view

Things to keep in mind

  1. Accuracy is not perfect. Background noise, accents, or unclear speech can produce wrong words. Treat the text as an aid, not a legal record by itself.

  2. Hold. If the customer keeps talking while you are on hold, their speech may still appear as text.

  3. Slight delay. Lines usually appear after a short pause in speech, not letter-by-letter while someone is mid-word.

  4. Same conversation. If you do not see text, make sure you are looking at the conversation that belongs to the active voice call.

  5. No agent toggle. You cannot turn Live Call Transcription on or off from Agent Desk. Ask your voice admin if a call type or tenant is supposed to have it.

Quick FAQ

Q: Where do I open live transcription?
A: You do not. Open the active voice conversation in Agent Desk. Text appears in that thread when the feature is enabled.

Q: Why is there no text on my call?
A: Common reasons: the call is not yet bridged, transcription is not enabled for your tenant or call type, or you are viewing a different conversation than the one for this call. Contact your voice / CX admin if it should be on.

Q: Can the customer see this text?
A: Customers do not use Agent Desk. The text is for agents and supervisors in the CX conversation.

Q: Does this replace call recording?
A: No. This is live text during the call. Recording and retention follow your site’s normal voice recording policies.

Q: Is my speech also transcribed?
A: Yes. Both customer and agent speech are transcribed and labeled in the conversation when dual-leg transcription is enabled.

Summary

Item

Detail

Who uses it

Agents and supervisors on Agent Desk

Where to look

Active voice conversation thread

What you see

Customer and agent speech as text messages

When it starts

After the call is bridged

Agent setup

None — enabled by Media Server / CX operations